ZJSHUYI Five common fault problems of soft starter.www.shuyitop.com; #so...

1. The motor can't get up There are two reasons why the motor cannot start. One is that one of the six thyristors is unreliable or non-conductive, the one-phase circuit passes half-wave DC, and the two-phase winding of the motor passes through the DC to start the motor. When the braking effect is reached, not only the motor cannot be started, but also the motor and the thyristor will be burned in serious cases. The second is that the motor cannot be started due to improper starting parameters or starting curve, which is the most common fault problem. 2. The thyristor is burnt The thyristor is destroyed or exploded. This kind of failure has nothing to do with domestic and foreign brands, but the failure rate is lower than that of the contactor. The main problem appears in the installation technology of the pie-type thyristor. 3. Controller burnout Compared with the soft starter, the controller burns the most seriously. Some manufacturers have this failure with repair rates in excess of 30%. Such problems are rare for imported and joint-venture manufacturers, mainly because the three parts of the controller's power supply, trigger circuit and input circuit are easily burned. 4. Soft starter malfunction When the soft starter is disturbed and stopped under the running device, when the soft starter is disturbed to start, the former is common, and the latter has only two brands. The main reasons for the malfunction are: one is the product quality problem, and the other is related to the circuit layout. 5. The internal plug-in of the soft starter is in poor contact The choice of the internal plug-in of the soft starter is not a problem. This is a problem that domestic manufacturers are easy to ignore, so failures often occur. www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355775769 #softstarter #motorsoftstar #softstarters #softstartechnology #solidstatesoftstarter #functionsmartsoftstarter #ZJSHUYI #intelligentmotorsoftstarter #chinashuyi#shuyitop

评论

发表评论

此博客中的热门博文

ZJSHUYI Maintenance requirements for frequency converters. www.shuyitop....

图片
Maintenance requirements in the day-to-day operation of the frequency converter 1. Check whether the cooling system is normal, and clean the dust of the air filter. 2. Check whether the screws, bolts and other fasteners of the inverter are loose, and perform necessary tightening; for the parts with soldering and crimping terminals, check whether there is corrosion, discoloration, cracks, damage, etc., and also check the frame Whether the structural parts are loose, whether the conductors and wires are damaged, etc. 3. Check whether the connection of the control circuit board is loose, whether the capacitor is leaking, whether the lines on the board are rusted, broken, etc. 4. Check whether the filter capacitor is leaking and whether the capacitance is reduced. 5. Check whether the insulation resistance is within the normal range. www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355775769 #VFD #INVERTER #frequencyinverter #frequencyconverter #shuyitop #converter ...
阅读全文

ZJSHUYI Usually the soft start system is composed of softstart device. w...

图片
Usually the soft start system is composed of softstart device, peripheral circuit and motor load. Therefore, the objects protected by the soft start system are also the soft start device, peripheral circuit and motor load. The purpose of protecting the soft start system is to ensure the safe and reliable operation of thyristor components, #softstarter equipment and circuits, and not damage or cause safety accidents under various abnormal working conditions. The premise of #softstarter protection is that the design of the soft starter itself should be correct. The thyristor components are correct and used correctly, the drive circuit and the control circuit are reasonably designed and matched with each other, so that the device can work in a good state. These measures are the basis for the safe and reliable operation of the soft starter. Only under this premise, can the devices, circuits, and equipment fail less and not fail from the inside, and the optimized system design should aim ...
阅读全文

ZJSHUYI Classic case of inverter maintenance failure.www.shuyitop.com; ...

图片
Foreword: Inverter repairers must keep in mind that the inverter module and the drive circuit are strongly related to failures. When the inverter module bursts and damages, the drive circuit is bound to be damaged by impact. The damage of the inverter module may also be caused by the failure of the drive circuit. Therefore, whether it is a failure of the drive circuit or the inverter output circuit, it must be The inverter output circuit and the drive circuit are thoroughly inspected together. The power-on test of the main circuit must be carried out under the premise that the drive circuit is normal and can output six excitation pulses normally. Inverter power failure A 132KW inverter has a black screen fault. Part of the wire drawing machine stopped in the wire drawing workshop, and restarted production after half a month. As a result, the inverter went black after being powered on. It was judged that the switching power supply was faulty on the spot. The inverter was removed, and th...
阅读全文