Zhejiang SHUYI Electric Co., LTD

Now the long used in transmission engineering is three-phase asynchronous motor. In many cases, these motors cannot be directly connected to the power system due to their starting characteristics. If started directly on line, a surge current of 6 times the rated current of the motor will be generated, which can overload the supply system and the series switchgear. If it is started directly, it will also produce a higher peak torque. This impact will not only impact the driving motor, but also make the mechanical device under load. For example, auxiliary power transmission components. To reduce the starting current, start auxiliary devices, such as starting reactors or autotransformers, should be used. However, this method can only gradually reduce the voltage, while the soft starter can realize non-impact starting by smoothly increasing the voltage of the gao terminal. Can better protect the power system and motor. Web:www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355

Soft starter function (1) The startup mode and parameters can be modified on site to meet various startup requirements. (2) Not affected by temperature, stable startup performance, high restart precision. (3) IT has small size, long service life and convenient installation and maintenance. Web:www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355775769 #softstarter #motorsoftstar #softstarters

First energize the soft start and then press the start button. When the number displayed on the screen reaches 100 percent, the motor starts to complete. When you want to stop the motor, press the stop button, the motor will stop running. www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355775769 #softstarter #motorsoftstar #softstarters

1. Press the "Program" key to enter the parameter group, and press the "△ ▽" key to switch the parameter group. 2. To modify the parameter, press the first step to enter the corresponding parameter, press the "program" key to enter the parameter, press the "△▽" key to modify the parameter value, after the modification is completed, press the "confirm" key to save the parameter, and press the "confirm" key again to return Go to the main interface. 3. Press the "Run" key to start the soft starter. 4. Press the "Stop" button to stop. 5. In the standby state, press the "ruturn" button to view the fault record. 6. Long press the "△" key to clear the fault record. 7. Long press "▽" to restore factory settings. Web:www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355775769 #softstarter #motorsoftstar #softstart

Inverter, this product uses intelligent detection circuit and automatic control system, so that the operation is more stable, reliable and safe; In the occurrence of overvoltage, overcurrent, short circuit and other faults, it will automatically detect the related components in the circuit, and make it send an alarm signal, in order to avoid greater trouble in the operation of the frequency converter, and provide more security for users; This product also has high reliable braking function (braking resistance is not less than 200KΩ), so that customers use safe and reliable; In addition, this product also has overvoltage protection (over the pressure set value automatically cut off the output), short circuit protection and other functions. www.shuyitop.com; Tel/Fax: 0086-577-62840011 WhatsApp: 008613355775769 #Frequencyconverter#VFD#INVERTER